Evolutionary PERC+ solar cell efficiency projection towards 24% evaluating shadow-mask-deposited poly-Si fingers below the Ag front contact as next improvement step

authored by: Thorsten Dullweber, Maximilian Stöhr, Christian Kruse, Felix Haase, Martin Rudolph, Birgit Beier, Philip Jäger, Verena Mertens, Robby Peibst, Rolf Brendel
Abstract: Monofacial PERC and bifacial PERC + solar cells have become the mainstream solar cell technology exhibiting conversion efficiencies around 22.5% in mass production. We determine a specific saturation current density J_0,Ag = 1400 fA/cm² of the screen-printed Ag front contact. When weighted with the contact area fraction of 3.0% the Ag metal contacts contribute 42 fA/cm² to the total J_0,total = 130 fA/cm² thereby being a main limitation of the V_oc. We investigate carrier selective poly-Si on oxide (POLO) fingers below the screen-printed Ag contacts of PERC + solar cells in order to minimize contact recombination. We name this solar cell PERC + POLO. Numerical simulations reveal that PERC + POLO cells exhibit an efficiency potential up to 24.1% which is 0.3%_abs. higher compared to PERC + solar cells. In order to enable low-cost manufacturing of poly-Si fingers, we investigate for the first time the deposition of suitable a-Si fingers by plasma-enhanced chemical vapour deposition (PECVD) through a shadow mask in a vacuum chamber. We demonstrate a-Si fingers as narrow as 70 μm and as high as 250 nm. The parasitic deposition below the mask increases the a-Si finger width by less than 30 μm compared to the mask opening width. First test wafers demonstrate an implied V_oc up to 716 mV of PECVD a-Si layers which are crystalized and doped in a subsequent POCl₃ diffusion. Applying this process sequence, PERC + POLO cells could be manufactured with the established industrial PERC + process only adding the PECVD deposition of a-Si fingers through a shadow mask.
External Organisation(s): Institute for Solar Energy Research (ISFH)
Type: Article
Journal: Solar Energy Materials and Solar Cells
Volume: 212
ISSN: 0927-0248
Publication date: 01.08.2020
Publication status: Published
Peer reviewed: Yes
ASJC Scopus subject areas: Electronic, Optical and Magnetic Materials, Renewable Energy, Sustainability and the Environment, Surfaces, Coatings and Films
Sustainable Development Goals: SDG 7 - Affordable and Clean Energy
Electronic version(s): https://doi.org/10.1016/j.solmat.2020.110586 (Access: Closed)